SISU - QUICKSTART, INSTALLATION AND USE, RALPH AMISSAH
QUICKSTART - SISU INSTALLATION AND USE
1. QUICKSTART - GETTING STARTED HOWTO
1.1 INSTALLATION
Installation is currently most straightforward and tested on the Debian platform, as there are packages for the installation of sisu and all requirements for what it does.
1.1.1 DEBIAN INSTALLATION
SiSU is available directly from the Debian Sid and testing archives (and possibly Ubuntu), assuming your /etc/apt/sources.list is set accordingly:
aptitude update aptitude install sisu-complete
The following /etc/apt/sources.list setting permits the download of additional markup samples:
#/etc/apt/sources.list deb http://ftp.fi.debian.org/debian/ unstable main non-free contrib deb-src http://ftp.fi.debian.org/debian/ unstable main non-free contrib d
The aptitude commands become:
aptitude update aptitude install sisu-complete sisu-markup-samples
If there are newer versions of SiSU upstream of the Debian archives,
they will be available by adding the following to your /etc/apt/sources.list
#/etc/apt/sources.list deb http://www.jus.uio.no/sisu/archive unstable main non-free deb-src http://www.jus.uio.no/sisu/archive unstable main non-free
repeat the aptitude commands
aptitude update aptitude install sisu-complete sisu-markup-samples
Note however that it is not necessary to install sisu-complete if not all components of sisu are to be used. Installing just the package sisu will provide basic functionality.
1.1.2 RPM INSTALLATION
RPMs are provided though untested, they are prepared by running alien against the source package, and against the debs.
They may be downloaded from:
<http://www.jus.uio.no/sisu/SiSU/download.html#rpm
>
as root type:
rpm -i [rpm package name]
1.1.3 INSTALLATION FROM SOURCE
To install SiSU from source check information at:
<http://www.jus.uio.no/sisu/SiSU/download.html#current
>
* download the source package
* Unpack the source
Two alternative modes of installation from source are provided, setup.rb (by Minero Aoki) and a rant(by Stefan Lang) built install file, in either case: the first steps are the same, download and unpack the source file:
For basic use SiSU is only dependent on the programming language in which it is written Ruby , and SiSU will be able to generate html, various XMLs, including ODF (and will also produce LaTeX). Dependencies required for further actions, though it relies on the installation of additional dependencies which the source tarball does not take care of, for things like using a database (postgresql or sqlite)[^1] or converting LaTeX to pdf.
setup.rb
This is a standard ruby installer, using setup.rb is a three step process. In the root directory of the unpacked SiSU as root type:
ruby setup.rb config ruby setup.rb setup #[and as root:] ruby setup.rb install
further information on setup.rb is available from:
<http://i.loveruby.net/en/projects/setup/
>
<http://i.loveruby.net/en/projects/setup/doc/usage.html
>
The root directory of the unpacked SiSU as root type:
ruby install
base
or for a more complete installation:
ruby install
or
ruby install base
This makes use of Rant (by Stefan Lang) and the provided Rantfile. It has been configured to do post installation setup setup configuration and generation of first test file. Note however, that additional external package dependencies, such as tetex-extra are not taken care of for you.
Further
information on
<http://rubyforge.org/frs/?group_id=615
>
For a list of alternative actions you may type:
ruby install help
ruby install -T
1.2 TESTING SISU, GENERATING OUTPUT
To check which version of sisu is installed:
sisu -v
Depending on your mode of installation one or a number of markup sample files may be found either in the directory:
or
change directory to the appropriate one:
cd /usr/share/doc/sisu/sisu_markup_samples/dfsg
1.2.1 BASIC TEXT, PLAINTEXT, HTML, XML, ODF
Having moved to the directory that contains the markup samples (see instructions above if necessary),
choose a file and run sisu against it
sisu -NhwoabxXyv free_as_in_freedom.rms_and_free_software.sam_williams.sst
this will generate html including a concordance file, opendocument text format, plaintext, XHTML and various forms of XML, and OpenDocument text
1.2.2 LATEX / PDF
Assuming a LaTeX engine such as tetex or texlive is installed with the required modules (done automatically on selection of sisu-pdf in Debian )
Having moved to the directory that contains the markup samples (see instructions above if necessary), choose a file and run sisu
against it
sisu -pv free_as_in_freedom.rms_and_free_software.sam_williams.sst
sisu -3 free_as_in_freedom.rms_and_free_software.sam_williams.sst
should generate most available output formats: html including a concordance file, opendocument text format, plaintext, XHTML and various forms of XML, and
OpenDocument text and pdf
1.2.3 RELATIONAL DATABASE - POSTGRESQL, SQLITE
Relational databases need some setting up - you must have permission to create the database and write to it when you run sisu.
Assuming you have
the database installed and the requisite permissions
sisu --sqlite --recreate
sisu --sqlite -v --import free_as_in_freedom.rms_and_free_software.sam_williams.sst
sisu --pgsql --recreate
sisu --pgsql -v --import free_as_in_freedom.rms_and_free_software.sam_williams.sst
1.3 GETTING HELP
1.3.1 THE MAN PAGES
Type:
man sisu
The man pages are also available online, though not always kept as up to date as within the package itself:
* sisu.1 <http://www.jus.uio.no/sisu/man/sisu.1 > [^2]
* sisu.8 <http://www.jus.uio.no/sisu/man/sisu.8 > [^3]
* man directory <http://www.jus.uio.no/sisu/man > [^4]
1.3.2 BUILT IN HELP
sisu --help
sisu --help --env
sisu --help --commands
sisu --help --markup
1.3.3 THE HOME PAGE
<http://www.jus.uio.no/sisu/SiSU >
1.4 MARKUP SAMPLES
A number of markup samples (along with output) are available off:
<http://www.jus.uio.no/sisu/SiSU/2.html >
Additional markup samples are packaged separately in the file:
*
On Debian they are available in non-free[^5] to include them it is necessary to include non-free in your /etc/apt/source.list or obtain them from the sisu home site.
DOCUMENT INFORMATION (METADATA)
METADATA
Document Manifest @ <http://www.jus.uio.no/sisu/sisu_manual/sisu_quickstart/sisu_manifest.html >
Dublin Core (DC)
DC tags included with this document are provided here.
DC Title: SiSU - Quickstart, installation and use
DC Creator: Ralph
Amissah
DC Rights: Copyright (C) Ralph Amissah 2007, part of SiSU documentation,
License GPL 3
DC Type: information
DC Date created: 2006-09-06
DC Date available: 2006-09-06
DC Date issued: 2006-09-06
DC Date modified: 2007-09-16
DC Date: 2007-09-16
Version Information
Sourcefile: sisu_quickstart.sst
Filetype: SiSU text 0.57
Sourcefile Digest, MD5(sisu_quickstart.sst)=
e76db98ca0d8c2bfe526dad55622fa7a
Skin_Digest: MD5(/home/ralph/grotto/theatre/dbld/sisu-dev/sisu/data/doc/sisu/sisu_markup_samples/sisu_manual/_sisu/skin/doc/skin_sisu_manual.rb)=
20fc43cf3eb6590bc3399a1aef65c5a9
Generated
Document (metaverse) last generated: Mon Sep 24 15:36:15 +0100 2007
Generated by: SiSU 0.59.0 of 2007w38/0 (2007-09-23)
Ruby version: ruby 1.8.6 (2007-06-07 patchlevel 36) [i486-linux]